Highbond anchor FHB II-A L
  • Product Picture: "fischer Highbond anchor FHB II-A L M16 x 125/30 gvz"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Application Picture
      Номер артикула 506903

      fischer Highbond anchor FHB II-A L M16 x 125/30 gvz

      Варианты продукта
      CAD Data
      Download of image data
      Top Features
      • Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required.
      • Optimised anchor rod for the highest tensile loads.
      • Optimised for low axial and edge distances in cracked concrete.
      • No drill hole cleaning is required when using a resin capsule. This saves time.
      • ETA approval for cracked concrete.

      Преимущества / Описание продукта

      The best performance in cracked concrete for maximum tensile loads.
      Advantages
      • The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
      • The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
      • The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
      • No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
      • When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.
      The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas.

      Заявка и подтверждение

      Applications
      • Façades
      • Staircases
      • Steel brackets
      • Machines
      • Silo installations
      • Masts
      • Rash protection
      • Steelwork constructions
      • Timber constructions
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked and non-cracked
      Also suitable for:
      • Concrete C12/15
      Подробную информацию о строительных материалах Вы можете найти в технической документации.
      Технические оценки
      • ETA-05/0164
      • DoP No. 0282
      • GS 3.2/16-352-1
      • (2103/12/12) - CM

      Инструкция по монтажу

      Functionality
      • The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
      • When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
      • The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
      • When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
      • The styrene-free vinyl ester mortar fully seals the drill hole.
      • When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.
      Посмотреть инструкции по сборке в формате PDF
      Pre-positioned installation in concrete with FIS HB
      1 / 9
      • 1
        Pre-positioned installation in concrete with FIS HB
      • 2
      • 3
      • 4
      • 5
      • 6
      • 7
      • 8
      • 9
      Installation in concrete with capsule FHB II-P / -PF
      1 / 5
      • 1
        Installation in concrete with capsule FHB II-P / -PF
      • 2
      • 3
      • 4
      • 5

      Технические данные

      ETA-approval
      Drill diameter (
      d0
      )      		18 mm
      Drill hole depth (
      h0
      )      		140 mm
      Anchorage depth (
      hef
      )      		125 mm
      Max. fixture thickness (
      t fix
      )      		30 mm
      Thread (
      M
      )      		M16
      Width across nut 24 mm
      Scale parts mortar 11
      Packaging Folding box
      Amount 10 pcs.
      GTIN (EAN-Code) 4048962078152

      Документы для скачивания

      • ETAs and DoPs
      • Approvals and Certificates
      • Technical documents
      ETA Certification Document
      pdf, ETA-05/0164
      European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete
      Создано 12/14/2017
      DOP - Declaration of Performance
      pdf, DoP No. 0282
      Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)
      Создано 01/19/2021
      cd-blue-c6785f99-77wnx