Anchor rod/Internal thread anchor
  • Product Category Picture: "Highbond anchor FHB II-A S"
    • Product Category Picture
      The best performance in cracked concrete with the least installation effort.

      Highbond anchor FHB II-A S

      The fischer Highbond anchor FHB II-A S is a system component of the fischer Highbond-System FHB II. The force-controlled expanding composite anchor is ideal for fixing maximum loads in cracked and non-cracked concrete. The threaded rod can be used with approval either with the injection mortar FIS HB FIS HB or the resin capsules FHB II-P and FHB II-PF HIGH SPEED. The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances as well as thin concrete members. The low anchorage depth of the FHB II-A S reduces the drill and installation work. No drill hole cleaning is required for installation with the resin capsules. This allows a particularly economical and time-saving fixing.
      Product Variant
      Download of image data

      Product Variant

      Filter
      Filter
      Approvals / Test reports
      45 product variants
      Drill diameter
      Drill hole depth
      Anchorage depth
      Max. fixture thickness
      Thread
      Width across nut
      Legend = Permission Available— = Permission not Available
      More results
      Viewed 18 of 45 variant (s)

      Your advantages / Product description

      Advantages
      • The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
      • With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
      • The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
      • The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.

      Application and approval

      Applications
      Suitable for:
      • Guard rails
      • Façades
      • Staircases
      • Steel brackets
      • Masts
      • Rash protection
      • Steelwork constructions
      • Timber constructions
      Ideal for:
      • Push-through installation
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked and non-cracked
      Also suitable for:
      • Concrete C12/15
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-05/0164
      • ETA-21/0948
      • DoP No. 0282
      • DoP No. 0293
      • DoP No. 0327
      • GS 3.2/16-352-1
      • (2103/12/12) - CM

      Assembly instruction

      Functionality
      • The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
      • With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
      • The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
      • When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
      • When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.
      Pre-positioned installation in concrete with FIS HB
      1 / 9
      • 1
        Pre-positioned installation in concrete with FIS HB
      • 2
      • 3
      • 4
      • 5
      • 6
      • 7
      • 8
      • 9
      Installation in concrete with capsule FHB II-P / -PF
      1 / 5
      • 1
        Installation in concrete with capsule FHB II-P / -PF
      • 2
      • 3
      • 4
      • 5

      Documents for Downloading

      • ETAs and DoPs
      • Approvals and Certificates
      • Technical documents
      ETA Certification Document
      pdf, ETA-05/0164
      European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete
      Created on 12/14/2017
      DOP - Declaration of Performance
      pdf, DoP No. 0282
      Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)
      Created on 01/19/2021
      ETA Certification Document
      pdf, ETA-21/0948
      European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life
      Created on 09/09/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0327
      Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)
      Created on 09/16/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0293
      Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded expansion fastener for use in concrete)
      Created on 01/03/2022
      Similiar product categories
      cd-blue-c6785f99-bhvvp