Anchor sleeves
  • Product Category Picture: "Injection anchor sleeve FIS H K"
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
      The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry.

      Injection anchor sleeve FIS H K

      The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed.
      Product Variant
      Download of image data

      Product Variant

      Filter
      Filter
      Approvals / Test reports
      18 product variants
      Drill diameter
      Min. drill hole depth
      Match
      Min. effect. anchorage depth
      Fill quantity per sleeve
      Contents
      Legend = Permission Available— = Permission not Available
      Viewed 18 of 18 variant (s)

      Your advantages / Product description

      Advantages
      • The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus, FIS V, FIS VL and FIS P Plus, and ensures sparing mortar use with the best interlock.
      • The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters.
      • The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation.
      • The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation.

      Application and approval

      Applications
      • Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus and FIS P
      Building materials
      Approved for:
      • Vertically perforated brick
      • Hollow blocks made from lightweight concrete
      • Hollow blocks made from concrete
      • Perforated sand-lime brick
      • Solid sand-lime brick
      • Solid brick
      Suitable for:
      • Hollow pumice slabs
      • Slabs made of hollow brick and other perforated brick
      • Solid pumice and other solid building materials
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-15/0263
      • ETA-10/0383
      • ETA-14/0471
      • ETA-20/0729
      • DoP No. 0195
      • DoP No. 0189
      • DoP No. 0273
      • DoP No. 0354

      Assembly instruction

      Functionality
      • The system can be used with any of the following injection mortars: FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL or FIS P Plus. FIS P can be used but does not have approvals.
      • The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E.
      • The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base.
      • Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock.

      Documents for Downloading

      • ETAs and DoPs
      • Technical documents
      ETA Certification Document
      pdf, ETA-15/0263
      European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry
      Created on 07/07/2020
      DOP - Declaration of Performance
      pdf, DoP No. 0195
      Declaration of Performance for fischer injection mortar FIS VL (Metal injection anchor for use in masonry)
      Created on 08/04/2020
      ETA Certification Document
      pdf, ETA-10/0383
      European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry
      Created on 07/07/2020
      DOP - Declaration of Performance
      pdf, DoP No. 0189
      Declaration of Performance for fischer injection system FIS V (Metal injection anchors for use in masonry)
      Created on 07/21/2019
      ETA Certification Document
      pdf, ETA-14/0471
      European Technical Assessment fischer Injection system FIS GREEN for masonry - Injection system for use in masonry
      Created on 02/03/2015
      DOP - Declaration of Performance
      pdf, DoP No. 0273
      Declaration of Performance for fischer Injection system FIS GREEN (Metal injection anchors for use in masonry)
      Created on 01/20/2021
      ETA Certification Document
      pdf, ETA-20/0729
      European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry
      Created on 02/03/2025
      DOP - Declaration of Performance
      pdf, DoP No. 0354
      Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)
      Created on 11/14/2023
      cd-blue-c6785f99-b6bsb