The ready-to-use, extrudable joint mortar for the long-lasting closing of masonry joints.

Ready-to-use joint repair mortar Repair AC (DEC)

fischer Repair AC, the ready-to-use, paintable repairing mortar that has a variety of uses. These include renovating masonry, fixing roof tiles, sealing drill holes or general repair work. The practically odour-free mortar can be easily used due to its stable consistency. It provides very good resistance to weather, ageing and UV. The single-component polymer dispersion can be processed at temperatures between +5 °C and +40 °C, and is temperature-resistant between -30 °C and +75 °C. fischer Repair AC can also be reused. When in the cartridge, it is protected against frost at temperatures down to -15 °C.

Product Variant

Download of image data

Product Variant

2 product variants

Contents

Language on label

Contents

Packaging

Amount

GTIN (EAN-Code)

Viewed 2 of 2 variant (s)

Advantages

The ready-to-use, sprayable joint mortar means that there is no need to add water or carry out time-consuming pre-mixing work. It enables clean, purposeful work. This means that you avoid dirtying surrounding areas and wasting material.
Good adhesion even on slightly damp substrates practically allows for all-weather work and prevents forced interruptions.
The structure of the high-quality water-based polymer has been perfectly designed with the visual appearance of the mortar in mind. This ensures a discreet joint and perfect appearance.

Applications

Repairing masonry joints
Closing masonry cracks
Repairing chipped edges
Closing drill holes in facing masonry during repair work
General repair work (e.g. drill holes with cracked edges)
For a better reusability, to close opened cartridges with adhesive tape

Building materials

Concrete
Pumice
Fibre cement
Gypsum
Wooden materials
Sand-lime brick
Ceramics
Clinker brick
Masonry
Aerated concrete
Plaster
Cement
Brick

You can find detailed information on building materials in the approval document.

Functionality

Chemical base: 1C polymer dispersion
Plastic
Consistency: Firm
Practically odour-free
Skin formation time: Approx. 10 minutes.
Processing temperature: +5 °C to +40 °C (not below +5 °C)
Temperature resistance up to -30 °C (fully cured)
Weather-proof after approx. 24 hours.
Very good resistance to UV, weather and ageing
Paintable
Frost-protected in the cartridge
Free of silicone, MDI and solvents
Not recommended for caulking guns with a transmission ratio of less than 10:1 (e.g. KPM1)

Ready-to-use joint repair mortar Repair AC (DEC)

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading

Contents	310 ml
Language on label	DE, EN, FR
Contents	310 ml
Packaging	Cartridge
Amount	1 pcs.
GTIN (EAN-Code)	4048962233308