Absorption and transfer of the occurring wind and dead loads of the façade system.
Compensation of construction tolerances possible.
Installation with two different anchoring depths possible.
Lengths from 70 - 330mm, depending on anchoring depth.
Your advantages / Product description
Fixed/sliding point bracket set ATK 601 for push-through installation as rod-system.
Advantages
Enables retrofitting of ventilated rainscreen façades.
By means of the push-through and stand-off installation, the wall holder can also be used in already insulated substrates.
Applicable for horizontal and vertical systems.
The passive house certification guarantees sustainable and energy-efficient fixing.
Different load levels are applicable through multiple anchorage depths.
The ATK 601 wall holder set consists of an SXRL frame fixing, which absorbs the shear, tensile and compressive forces, as well as an add-on part and a T-piece. Depending on the orientation of the T-piece, a vertical or horizontal aluminum subframe system can be mounted on the wall holder.
Properties
Anchor: Polyamid and stainless steel or zinc-plated steel
Attachment parts: Aluminum (e.g. EN AW 6063) and stainless steel
Application and approval
Applications
As a wall holder set for renovating existing façades
Consisting of a frame fixing anchor, as well as an attachment part and a T-piece
For load transfer into the building substrate of subframe systems in ventilated rainscreen façades
Building materials
Vertically perforated brick
Aerated concrete
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid block made from lightweight and normal weight concrete
Solid brick
Solid sand-lime brick
Concrete ≥ C12/15
You can find detailed information on building materials in the approval document.
Approval
DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008
1281fa03
Assembly instruction
Functionality
Vertical load transfer from the subframe system into the building substrate
Renovation of existing façades
Absorption of loads through the connection to the vertical profiles
Installation FRH - ATK601
1 / 7
1
2
3
4
5
6
7
Technical Data
Length (
L
)
60 mm
Height (
H
)
60 mm
Hole-ø (
D
)
5,1 mm
Length (
L2
)
130 / 110 mm
System
—
Contents
50 x SXRL 14 T R 50 x Base plate 50 x T-console 100 x Rivet
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)