The undercut anchor for thin ceramic façade panels.

Zykon panel anchors FZP II T D40 PA

The undercut anchor for a concealed fixing of thin façade panels out of ceramics or fine stoneware. Use in conjunction with clasp systems or with other attachments.
Product VariantDownload of image data

Product Variant

Filter
Filter
Approvals / Test reports
5 product variants
Min. panel thickness
Total length
Thread
Cylindrical diameter
Undercutdiameter
Amount
Legend = Permission Available = Permission not Available
Viewed 5 of 5 variant (s)

Your advantages / Product description

Advantages
  • The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
  • The fixing is not externally visible, creating a visually appealing façade surface.
  • The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
  • Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
  • The anchor allows higher failure loads compared to common systems.
  • This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Application and approval

Applications
For high aesthetical requrements:
  • The concealed fixing of thin façade panels on exterior and interior façade as well as reveal panels.
Building materials
  • Ceramics
  • Fine stoneware (>10mm)
You can find detailed information on building materials in the approval document.
Approval
  • ETA-23/0756
  • ETA-23/0035
  • ETA-22/0400
  • DoP No. 0359
  • DoP No. 0364
  • DoP No. 0322

Assembly instruction

Functionality
  • wet diamond drilling in ceramic
  • The drill hole is drilled with an absolute anchoring depth
  • Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
  • drilling: first cylindrical, then conical - to create the undercut.
  • Inserting the undercut anchor in the cylindrical-conical undercut hole
  • Expanding the undercut anchor by "pressing down" the washer using the setting tools
  • Stress-free and geometrical inter-locking fixing
Installation FZP II T D40 PA
1 / 4

Documents for Downloading

  • ETAs and DoPs
European Technical Assessment for fischer-Zykon panel anchor FZP II T
Created on 12/08/2023
Declaration of Performance for fischer-Zykon-panel anchor FZP II T
Created on 04/12/2024
European Technical Assessment for fischer ZYKON FZP II T D40 PA for fixing Atlas Concorde facade panels - Fastener of external wall claddings. Special anchor for the rear fixing of Atlas Concorde ceramic tile facade panels
Created on 01/24/2023
Declaration of Performance for fischer ZYKON FZP II T D40 PA panel anchor (for Atlas Concorde ceramic tile facade panels)
Created on 06/03/2024
European Technical Assessment for fischer ZYKON FZP II for fixing Mirage facade panels
Created on 08/25/2022
Declaration of Performance for fischer Zykon-panel anchor FZP II (for Mirage)
Created on 10/12/2022
cd-blue-c6785f99-77wnx