Hammerset for solid and hollow building materials
  • Product Category Picture: "TermoZ CN 8"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The high-performance ETICS hammerset fixing with compound nail.

      TermoZ CN 8

      The fischer TermoZ CN is ideal for fixing pressure-resistant insulation 400 mm thick such as polystyrene boards or mineral wool boards, wood wool lightweight panels in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely. The European Technical Assessment guarantees a secure hold. The TermoZ CN comprises a grey plug sleeve with attached disc and a compound nail. The TermoZ CN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The steel point of the compound nail guarantees high holding forces. Thanks to the flat plug disc, a cheap, thin reinforced plaster layer can be applied.
      Product Variant
      Download of image data

      Product Variant

      Filtre
      Filtre
      Onaylar / Test raporları
      15 Ürün çeşidi (s)
      Drill diameter
      Anchor length
      Min. effect. anchorage depth
      Max. fixture thickness
      Min. total drill whole depth incl. insulation
      Disc ø
      Efsane = İzin Mevcut— = İzin Mevcut Değil
      15 değişken (ler) in 15 görüntülendi

      Your advantages / Product description

      Advantages
      • To set with few hammer blows.
      • The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
      • High retention forces thanks to the steel tip of the compound nail.
      • Small anchoring depth of 35 mm saves on drilling times.
      • The TermoZ CN is free of thermal bridging due to the compound nail.
      • The compression zone in the shank allows the disc to be drawn in precisely.
      • Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials.
      • For insulating material thicknesses up to 340 mm.

      Application and approval

      Applications
      • Installation of ETICS insulating boards on concrete and masonry
      • Flush-to-surface installation in ETICS insulating materials e.g. polystyrene and mineral wool
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Full blocks made from concrete
      • Building brick
      • Solid sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Lightweight aggregate concrete
      • Aerated concrete
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-09/0394
      • DoP No. 0326
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functionality
      • The fixing is set in push-through installation.
      • Simple, fast setting by using a standard hammer.
      • Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.
      Installation FIF-CN II 8
      1 / 4
      • 1
        Installation FIF-CN II 8
      • 2
      • 3
      • 4

      Documents for Downloading

      • ETAs and DoPs
      • Sustainability
      • Technical documents
      ETA Certification Document
      pdf, ETA-09/0394
      European Technical Assessment for fischer TermoZ CN 8 / fischer TermoZ CN 8 R / fischer TermoZ CNplus 8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry
      Created on 10/18/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0326
      Declaration of Performance for fischer termoz CN 8 / fischer termoz CN 8 R / termoz CNplus 8 R (Plastic anchors for use in concrete and masonry)
      Created on 10/31/2022
      cd-blue-c6785f99-pww5z