Hammerset for solid and hollow building materials
  • Product Category Picture: "TermoZ PN 8"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The thermal bridge-free ETICS hammerset fixing with GRP-nail.

      TermoZ PN 8

      The fischer TermoZ PN is ideal for fixing pressure-resistant insulation boards with rendering such as polystyrene boards, Mineral wool boards, wood shaving lightweight panels and PU panels in concrete, aerated concrete, solid and perforated brick securely and without thermal bridges. The European Technical Assessment guarantees a secure hold. The fischer TermoZ PN comprises a grey plug sleeve with attached disc and a plastic nail. The TermoZ PN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The innovative plug shaft and the special geometry of the plastic nail give the plug a secure hold even in solid building materials. The asymmetric expansion element ensures a secure hold even in perforated building materials and unknown subsurface.
      Product Variant
      Download of image data

      Product Variant

      Filter
      Filter
      Approvals / Test reports
      7 product variants
      Drill diameter
      Anchor length
      Min. effect. anchorage depth
      Max. fixture thickness
      Min. total drill whole depth incl. insulation
      Packaging
      Legend = Permission Available— = Permission not Available
      Viewed 7 of 7 variant (s)

      Your advantages / Product description

      Advantages
      • Due to the special geometry of the fixing, small drill hole depths are possible.
      • The crumble zone allows an exact washer penetration.
      • The asymmetric expansion element ensures a perfect anchoring even in hollow and problem substrates.
      • The innovative shank and the special geometry of the nylon nail minimize the failure tendency significant particularly in full substrates.
      • The washer thickness of only 2.5 mm allows thin and economic reinforcement layers.
      • Due to the nylon nail the TermoZ PN provides no thermal bridging.
      • Can be combined with insulation retaining washers DT 90, 110 and 140 mm.

      Application and approval

      Applications
      • Installation of ETICS insulating boards on concrete and masonry
      • Flush to surface installation in ETICS insulating materials e.g. polystyrene and mineral wool
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Building brick
      • Solid sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Lightweight aggregate concrete
      • Aerated concrete
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-09/0171
      • DoP No. 0325
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functionality
      • Hammerset fixing for the mounting of ETIC-Systems with insulation boards in concrete and masonry.
      • By hammering in the pre-assembled GRP nail with a hammer the fastener will be fixed in the substrate.
      • Non load bearing layers such as adhesives and old render are to be included in the required useful length.
      Installation FIF-PN 8
      1 / 4
      • 1
        Installation FIF-PN 8
      • 2
      • 3
      • 4

      Documents for Downloading

      • ETAs and DoPs
      • Sustainability
      • Technical documents
      ETA Certification Document
      pdf, ETA-09/0171
      European Technical Assessment for fischer TermoZ PN 8
      Created on 10/18/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0325
      Declaration of Performance for fischer termoz PN 8 (Plastic anchors for use in concrete and masonry)
      Created on 11/14/2022
      cd-blue-c6785f99-6nz7h