Art.-No. 564160

fischer TermoZ CS II 8/355 DT 110 V

Top Features
  • Reduction of thermal bridges due to the compound screw.
  • No anchor marks.
  • Approved for hammer-drilled holes in vertically perforated bricks.
  • Minimal insertion torque.
  • No ejected dirt due to closed plate.

Your advantages / Product description

The strong countersunk screw fixing for soft insulating boards.
Advantages
  • Pre-assembled fixing with a 110 mm plate for countersunk mounting.
  • The compound screw minimises thermal bridges, thus there are no anchor marks on the façade.
  • The combination of the advantages of countersunk installation and additional plates achieves a homogeneous surface with higher pull-through values at the same time.
  • The very thin plate edge provides an optimal fit to the insulation board and the application of thin reinforcement layers.
  • Due to the special expansion zone of the anchor sleeve, the TermoZ CS II, is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
  • The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
  • The special geometry of the underside of the plate reduces the necessary insertion torque for convenient and fast installation.
The TermoZ CS DT 110V, as a fully pre-assembled ETICS fastener with a plate diameter of 110mm for countersunk mounting, is perfectly suited for fastening insulation boards with low compressive strength. By combining the advantages of countersunk installation and additional plates, a homogeneous surface is achieved with higher pull-through values at the same time. The fastener is installed countersunk perfectly with the CS setting tool and a standard hammer drill or cordless screwdriver.

Application and approval

Applications
  • Countersunk installation of soft insulation materials such as mineral wool boards on concrete and masonry
Building materials
  • Building material classes A, B, C, D, E
  • Concrete
  • Building brick
  • Solid sand-lime brick
  • Lightweight concrete
  • Weather shell
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Hollow blocks made from lightweight concrete
  • Lightweight aggregate concrete
  • Aerated concrete
You can find detailed information on building materials in the approval document.
Approval
  • ETA-14/0372
  • DoP No. 0298
  • DoP No. 0346
  • EPD-FIW-20210314-CBD1-EN

Assembly instruction

Functionality
  • Fast countersunk installation with the TermoZ CS setting tool and a standard hammer drill or cordless screwdriver.
  • The fixing is pushed through the insulation into the drill hole and is screwed in.
  • The installation is completed when the plate is flush with the insulation board.
  • After countersunk installation, the anchor plate has to be covered with a round cap.
Countersunk installation of TermoZ CS II DT 110 V with setting tool CS
1 / 6

Technical Data

ETA-approval
Drill diameter (
d0
)
8 mm
Effect. anchorage depth (
hef
)
25 mm
Max. usable length at countersunk installation (
tfix
)
330 mm
Min. total drill whole depth incl. insulation at countersunk installation (
h
)
385 mm
Drive TX30
Amount 50 pcs.
GTIN (EAN-Code) 4048962459418

Documents for Downloading

  • ETAs and DoPs
  • Sustainability
  • Technical documents
  • Sales materials
European Technical Assessment for fischer TermoZ CS II 8 and fischer TermoZ CS II 8 DT 110 V
Created on 11/03/2023
Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic anchors for use in concrete)
Created on 11/17/2023
Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic fastener for fixing of external thermal insulation composite systems with rendering)
Created on 05/16/2022
cd-blue-c6785f99-b6bsb