TermoZ CS II DT 110 V
  • Product Picture: "fischer TermoZ CS II 8/435 DT 110 V"
  • Product Picture: "fischer TermoZ CS II 8/435 DT 110 V"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Product Picture
    • Application Picture
      Art.-No. 566431

      fischer TermoZ CS II 8/435 DT 110 V

      Product Variant
      Download of image data
      Top Features
      • Reduction of thermal bridges due to the compound screw.
      • No anchor marks.
      • Approved for hammer-drilled holes in vertically perforated bricks.
      • Minimal insertion torque.
      • No ejected dirt due to closed plate.

      Your advantages / Product description

      The strong countersunk screw fixing for soft insulating boards.
      Advantages
      • Pre-assembled fixing with a 110 mm plate for countersunk mounting.
      • The compound screw minimises thermal bridges, thus there are no anchor marks on the façade.
      • The combination of the advantages of countersunk installation and additional plates achieves a homogeneous surface with higher pull-through values at the same time.
      • The very thin plate edge provides an optimal fit to the insulation board and the application of thin reinforcement layers.
      • Due to the special expansion zone of the anchor sleeve, the TermoZ CS II, is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
      • The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
      • The special geometry of the underside of the plate reduces the necessary insertion torque for convenient and fast installation.
      The TermoZ CS DT 110V, as a fully pre-assembled ETICS fastener with a plate diameter of 110mm for countersunk mounting, is perfectly suited for fastening insulation boards with low compressive strength. By combining the advantages of countersunk installation and additional plates, a homogeneous surface is achieved with higher pull-through values at the same time. The fastener is installed countersunk perfectly with the CS setting tool and a standard hammer drill or cordless screwdriver.

      Application and approval

      Applications
      • Countersunk installation of soft insulation materials such as mineral wool boards on concrete and masonry
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Building brick
      • Solid sand-lime brick
      • Lightweight concrete
      • Weather shell
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Lightweight aggregate concrete
      • Aerated concrete
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-14/0372
      • DoP No. 0298
      • DoP No. 0346
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functionality
      • Fast countersunk installation with the TermoZ CS setting tool and a standard hammer drill or cordless screwdriver.
      • The fixing is pushed through the insulation into the drill hole and is screwed in.
      • The installation is completed when the plate is flush with the insulation board.
      • After countersunk installation, the anchor plate has to be covered with a round cap.
      Countersunk installation of TermoZ CS II DT 110 V with setting tool CS
      1 / 6
      • 1
        Countersunk installation of TermoZ CS II DT 110 V with setting tool CS
      • 2
      • 3
      • 4
      • 5
      • 6

      Technical Data

      ETA-approval
      Drill diameter (
      d0
      )      		8 mm
      Effect. anchorage depth (
      hef
      )      		25 mm
      Max. usable length at countersunk installation (
      tfix
      )      		410 mm
      Min. total drill whole depth incl. insulation at countersunk installation (
      h
      )      		465 mm
      Drive TX30
      Amount 50 pcs
      GTIN (EAN-Code) 4048962466256

      Documents for Downloading

      • ETAs and DoPs
      • Sustainability
      • Technical documents
      • Sales materials
      ETA Certification Document
      pdf, ETA-14/0372
      European Technical Assessment for fischer TermoZ CS II 8 and fischer TermoZ CS II 8 DT 110 V
      Created on 11/03/2023
      DOP - Declaration of Performance
      pdf, DoP No. 0346
      Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic anchors for use in concrete)
      Created on 11/17/2023
      DOP - Declaration of Performance
      pdf, DoP No. 0298
      Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic fastener for fixing of external thermal insulation composite systems with rendering)
      Created on 05/16/2022
      cd-green-64c8fdbcdb-ddxh7