Screw fixing for wood and panel building materials
  • Product Category Picture: "TermoFix 6H-NT"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The ETICS screw fixing for board materials with approved screw.

      TermoFix 6H-NT

      The fischer screw fixing TermoFix 6H-NT is ideal for fixing pressure-resistant insulation up to 280 mm in wood and panel building materials. The screw fixing comprises a support disc made from polyamide with a prefitted fischer screw with approval. The minimal embedment depth of 30 mm ensures fast installation. The TermoFix 6H-NT is set flush to the surface in the push-through installation with a cordless powerdriver without pre-drilling. The head is them sealed with the screw plug. Optionally, the TermoFix 6H-NT can be countersunk with the fisher setting tool TSS. The insulation disk is then covered with a round cap.
      Product Variant
      Download of image data

      Product Variant

      14 product variants
      Anchor length
      Disc ø
      Screw diameter
      Anchorage depth
      Usable length at surface-flush installation
      Effective length with recessed mounting
      Viewed 14 of 14 variant (s)

      Your advantages / Product description

      Advantages
      • Pre-assembled fixing with the approved fischer screw. This guarantees safe retention in the substrate.
      • The minimum screw-in depth of 30 mm guarantees fast installation.
      • Closing plugs are enclosed in every packaging unit.
      • The fixing can be combined with the large insulating discs DT 90, DT 110 and DT 140 when very soft insulating materials are used.
      • Countersunk installation by using the TSS setting tool is possible in soft materials such as polystyrene boards.
      • For insulating material thicknesses up to 280 mm.

      Application and approval

      Applications
      • Attachment of ETICS insulating boards on wooden substructures
      • Flush installation in ETICS insulating materials e.g. polystyrene
      • Flush-to-surface installation in soft wood fibre boards
      Building materials
      • MDF boards
      • OSB boards
      • Chipboard
      • Gypsum fibreboard
      • Solid wood
      You can find detailed information on building materials in the approval document.
      Approval
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functionality
      • The fixing is screwed in by unsing a standard TX30 bit for flush installation.
      • The TSS setting tool is required for countersunk installation. This is used for precise positioning and screwing in the fixing. The countersunk hole is covered with a suitable insulation round cap which ensures a homoge­neous surface.
      • The disc of the TSS setting tool can also be turned and used for flush-to-surface installation. This prevents the plate from being set too deep.
      Countersunk installation with TSS setting tool
      1 / 4
      • 1
        Countersunk installation with TSS setting tool
      • 2
      • 3
      • 4
      Flush to surface installation with TX30 bit
      1 / 3
      • 1
        Flush to surface installation with TX30 bit
      • 2
      • 3

      Documents for Downloading

      • Sustainability
      • Technical documents
      EPD - Environmental Product Declaration
      pdf, EPD-FIW-20210314-CBD1-EN
      Environmental Product Declaration for fischer Insulation fixings
      Valid from 02/22/2022
      to 02/21/2027
      cd-blue-c6785f99-b6bsb