The economical ETICS hammerset anchor with plastic nail.

TermoFix PN

TermoFix PN is the economical ETICS hammer-set fixing for all standard applications without approval. With the TermoFix PN, ETICS facades with compression-resistant insulation boards made of polystyrene, mineral wool or wood soft fibres up to a thickness of 180 mm can be securely fastened to solid and perforated building materials. The ETICS fastener consists of a one-piece sleeve with plate element and a separately enclosed plastic nail. The TermoFix PN is driven in with a hammer, which saves installation time and costs. The glass fibre reinforced plastic nail minimises the transmission heat loss to a minimum.

Varianti del prodotto

Download of image data

Varianti del prodotto

Approvazioni / rapporti di prova

7 Varianti del prodotto

Drill diameter

Anchor length

Min. effect. anchorage depth

Max. fixture thickness

Disc ø

Amount

Legenda = Omologazione disponibile— = Omologazione non disponibile

Visualizzate 7 di 7 varianti

Advantages

The plastic nail guarantees a thermal bridge-free fixing with a Chi value of 0.000 [W/K].
The approved anchor can be set with only a few hammer blows, without using too much energy.
Due to the plate thickness of only 3.0 mm, it fits perfectly to the insulation, allowing thin reinforcement layers to be applied.
The glass fibre reinforced plastic nail (GRP) ensures a secure hold.
The 8 mm anchor diameter and the low embedment depth of min. 25 mm ensure economical installation with minimal drilling time.
The hammerset anchor has an ETA approval for the building material classes A, B and C.

Applications

Mounting of ETICS insulation boards on concrete and masonry
Surface-flush mounting of ETICS insulation boards e.g. made of mineral wool, polystyrene or wood fibre with a maximum insulation thickness of 180 mm

Building materials

Building material classes A, B, C
Concrete
Brick
Solid sand-lime brick
Lightweight concrete solid block
Lightweight concrete hollow block
Vertically perforated brick
Perforated sand-lime brick

Maggiori informazioni su materiali di supporto, ecc. sono disponibili nella documentazione tecnica.

Certificazioni

ETA-23/0453
DoP No. 0345

ETA-approval
Drill diameter ( d₀ )	8 mm
Anchor length ( l )	97 mm
Min. effect. anchorage depth ( h_ef )	25 mm
Max. fixture thickness ( t_fix )	70 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962441604

ETA-approval
Drill diameter ( d₀ )	8 mm
Anchor length ( l )	107 mm
Min. effect. anchorage depth ( h_ef )	25 mm
Max. fixture thickness ( t_fix )	90 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962441611

ETA-approval
Drill diameter ( d₀ )	8 mm
Anchor length ( l )	137 mm
Min. effect. anchorage depth ( h_ef )	25 mm
Max. fixture thickness ( t_fix )	110 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962441628

ETA-approval
Drill diameter ( d₀ )	8 mm
Anchor length ( l )	157 mm
Min. effect. anchorage depth ( h_ef )	25 mm
Max. fixture thickness ( t_fix )	130 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962441635

ETA-approval
Drill diameter ( d₀ )	8 mm
Anchor length ( l )	177 mm
Min. effect. anchorage depth ( h_ef )	25 mm
Max. fixture thickness ( t_fix )	150 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962441642

TermoFix PN

Varianti del prodotto

Vantaggi / descrizione del prodotto

Applicazioni e Certificazioni

Istruzioni di montaggio

Documenti da scaricare