- Cut and adjust the panels before gluing (if necessary, take into account door frames, skirting boards, sockets). If the surface is uneven, it is best to use a substructure.
- Clean and sand the surfaces and wall if necessary.
- Tip: use markings on the wall for support.
- Open the cartridge. Cut off the tip at an angle with a cutter knife.
- Screw in the joint tip.
- Apply adhesive to the panels in even vertical strips.
- Press the panels firmly into the desired position.
- Immediate hold! Finished!
It may be necessary to secure the panels until they have fully cured (approx. 24 hours). Depending on the final load, it is recommended to additionally secure the panels with plugs or screws for safety reasons.