33 mm high aluminium rail for PV panels mounting systems.

Rail SolarFish H33 AL

The SolarFish H33 AL rail is an AW 6063 T6 aluminium alloy rail for PV systems. The 33mm high cross section makes it particularly suitable for pitched roofs with close mounting points. The side groove and bottom groove are compatible with SKS M8 screws or RHS hammerhead screws. The SolarFish H33 AL rail is compatible with PMU / PMCU universal clamps and PMF / PMC pre-assembled clamps. The rail is suitable for mounting on pitched roofs in combination with stainless steel and aluminium hooks, on non-removable corrugated or barrel/flat tile roofs in combination with STSR and STSI double-threaded screws and on standing seam roofs in combination with DLA and DLAK clamps.
Product VariantDownload of image data

Product Variant

4 product variants
Weight
Amount
GTIN (EAN-Code)
Viewed 4 of 4 variant (s)

Your advantages / Product description

Advantages
  • The cross-section with reduced height optimizes the structure for installations with reduced support spacing.
  • The side groove and the bottom groove are compatible with the quick couplings of the hooks or with SKS M8 screws or RHS hammer head screws.
  • The 3 sizes available reduce waste and facilitate handling on site.
  • Compatible with all kinds of fischer solar clamps.
Properties
  • Aluminium alloy AW 6063 T66.
  • Please note: any oxidation stains are considered characteristic of aluminium. This in no way impairs the functionality of the product and is not covered by the warranty.
  • Black anodized products may shows little scratches due to packaging and transport.

Application and approval

Applications
  • All kinds of pitched and flat roofs.

Assembly instruction

Functionality
  • Identify the correct support system based on the type of roof (e.g., flat tile hooks, barrel tile hooks, triangular frames for flat roofs, standing seam clamps, etc).
  • Determine the centre distance of the fasteners according to snow and wind loads (use SOLARPANEL-FiX software to design the system).
  • Assemble the SolarFish H33 AL rail on the selected support using the bottom or side grooves.
  • To connect two SolarFish H33 AL rails, install a SolarFish H33 AL connector centred between the two rails and complete the installation using RHS 8 screws.
  • To limit thermal expansion, it is advisable to create series of rails connected to each other up to a maximum length of 15 m. Beyond this measure it is necessary to interrupt the structure and start again with a new rail disconnected from the previous ones.
  • Install the clamps through the upper groove of the rail. The SolarFish H33 AL rail is compatible with all kinds of fischer clamps.
  • Fix the PV panels by tightening the clamps.

Documents for Downloading

  • Sales materials
Solar systems. Mounting solutions for photovoltaic panels.
cd-green-58bb58464c-vq6sw