Liquid plug for strengthening or filling drill holes no longer required.
General repair compound for modelling or filling in various building materials.
Quick installation: Wood screws can be directly screwed into the hardened injection fixing.
Can be sanded and painted.
Your advantages / Product description
Liquid plugs and repair compounds for serious cases
Advantages
The Fill&Fix injection fixing works for every drill hole size and building material. As a result, a number of applications can be completed with just one product.
Wood screws can be screwed directly into the hardened injection fixing. This allows a fast and simple installation.
The special formulation allows to reuse a screwhole after removing a screw. Thus, components can be reattached to the same point.
Fill&Fix can be sanded and painted, and is suitable for filling drill holes that are no longer needed prior to painting.
Liquid plugs and repair compounds, ideal for repairing/strengthening drill holes or for fixing lightweight objects in difficult or dilapidated building materials as found in old buildings.
Application and approval
Applications
Repairing cracked or over-sized drill holes
Repairing broken furniture hinges etc.
Fixing lightweight objects in difficult or damaged building materials (old buildings)
Fixing lightweight objects in internal and UV-protected external areas
Building materials
Concrete
Vertically perforated brick
Hollow blocks made from lightweight concrete
Cavity floor slabs made from bricks and concrete
Wooden materials
Perforated sand-lime brick
Solid sand-lime brick
Natural stone with dense structure
Panel building materials
Aerated concrete
Solid panel made from gypsum
Solid brick made from lightweight concrete
Solid brick
You can find detailed information on building materials in the approval document.
Assembly instruction
Functionality
Fill&Fix is a 2-component, solvent-free injection compound based on polyurethane. It is applied into the drill hole, where it foams lightly and sets quickly.
The increase in volume during the setting process guarantees a secure hold, even in dilapidated or difficult building materials.
After approx. 2 minutes, screws, hooks, eye screws etc. with a diameter of up to 6 mm that are normally used in wood can be screwed into and removed from the set material without pre-drilling.
Use the perforated sleeves (included) for hollow and board building materials.
Installation in solid building materials
1 / 7
1
2
3
4
5
6
7
Installation in hollow and panel building material
1 / 8
1
2
3
4
5
6
7
8
Technical Data
Contents
1 x Cartridge 25 ml 2 x Static mixer 4 x Anchor sleeves 2 x Extension tubes
