Concrete screw UltraCut FBS II US
  • Product Picture: "fischer UltraCut FBS II 8 x 90 40/25 US TX"
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Youtube VideoYoutube VideoYoutube Video
    • Youtube VideoYoutube VideoYoutube Video
    • Product Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
      Art.-No. 536854

      fischer UltraCut FBS II 8 x 90 40/25 US TX

      Ürün çeşitleri
      CAD Data
      Download of image data
      Top Features
      • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.
      • The special saw tooth geometry enables fast cutting into the concrete.
      • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.
      • The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates.

      Avantajlar / Ürün açıklaması

      The high-performance concrete screw for absolute installation ease.
      Advantages
      • With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses.
      • The special saw tooth geometry enables fast cutting into the concrete.
      • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
      • Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
      • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
      • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
      • The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
      • The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
      • The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.
      The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.
      Youtube VideoYoutube VideoYoutube Video

      Uygulamalar ve Onaylar

      Applications
      • Guard rails
      • Consoles/Base plates
      • Metal profiles
      • Shelving systems
      • Protection barriers
      • Results / beam anchors
      • Temporary anchoring, e.g. of building site equipment
      • Shuttering props
      • Reinforcement of bridges
      • Rehabilitation of old and ailing buildings
      • Rehabilitation of car parks
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked and non-cracked
      • Reinforcement of existing concrete structures
      • Bricks of clay (EN771-1)
      • Solid sand-lime brick (EN771-2)
      • Perforated sand-lime brick (EN771-2)
      Also suitable for:
      • Concrete C12/15
      • Solid building materials
      • Masonry with a dense structure
      Yapı malzemelerine ilişkin ayrıntılı bilgileri kayıt belgesinde bulabilirsiniz.
      Onaylar
      • ETA-15/0352
      • ETA-20/0321
      • ETA-20/0134
      • DoP No. 0185
      • DoP No. 0227
      • DoP No. 0225
      • Z-21.8-2049

      Montaj talimatı

      Functionality
      • The UltraCut FBS II is recommended for the push-through installation.
      • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
      • We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
      • The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).
      Montaj talimatlarını PDF olarak görüntüleyin
      Installation UltraCut FBS II in concrete
      1 / 9
      • 1
        Installation UltraCut FBS II in concrete
      • 2
      • 3
      • 4
      • 5
      • 6
      • 7
      • 8
      • 9
      Fixture adjustment
      1 / 3
      • 1
        Fixture adjustment
      • 2
      • 3
      Additional for seismic applications
      1 / 2
      • 1
        Additional for seismic applications
      • 2

      Teknik veriler

      ETA-approval
      DIBt-approval
      Drill diameter (
      d0
      )      		8 mm
      Min. drill hole depth for through fixings (
      h2
      )      		100 mm
      Screw dimension (
      ds x ls
      )      		10.0 x 90 mm
      Nominal embedment depth / thickness of fixture (
      hnom1 / tfix
      )      		50 / 40 mm
      Nominal embedment depth / thickness of fixture (
      hnom2 / tfix
      )      		- mm
      Nominal embedment depth / thickness of fixture (
      hnom3 / tfix
      )      		65 / 55 mm
      Drive TX40 / SW 13
      Packaging Folding box
      Amount 50 pcs.
      GTIN (EAN-Code) 4048962251371

      İndirilecek belgeler

      • ETAs and DoPs
      • Approvals and Certificates
      • Technical documents
      • Sales materials
      ETA Certification Document
      pdf, ETA-15/0352
      European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete
      10/05/2020 tarihinde oluşturuldu
      DOP - Declaration of Performance
      pdf, DoP No. 0227
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)
      10/19/2020 tarihinde oluşturuldu
      ETA Certification Document
      pdf, ETA-20/0321
      European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Connector for Strengthening of existing concrete structures by concrete overlay
      06/19/2020 tarihinde oluşturuldu
      DOP - Declaration of Performance
      pdf, DoP No. 0225
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)
      07/03/2020 tarihinde oluşturuldu
      ETA Certification Document
      pdf, ETA-20/0134
      European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry
      07/14/2022 tarihinde oluşturuldu
      DOP - Declaration of Performance
      pdf, DoP No. 0185
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)
      11/27/2020 tarihinde oluşturuldu
      cd-green-58bb58464c-46z77