Nail anchor FNA II
  • Product Category Picture: "Nail anchor FNA II-H / FNA II-OE"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The installation-friendly hammerset anchor for multiple fixings.

      Nail anchor FNA II-H / FNA II-OE

      The fischer nail anchor FNA II-H with hook and FNA II-OE with eye are made from zinc-plated steel. They are primarily suitable for the anchoring of wire and nonious hangers indoors. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is set with a few hammer blows in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.
      Product Variant
      Download of image data

      Product Variant

      Filter
      Filter
      Approvals / Test reports
      2 product variants
      Anchor length
      Drill diameter
      Min. drill hole depth for through fixings
      Inner diameter of the hook/eye
      Packaging
      Amount
      Legend = Permission Available— = Permission not Available
      Viewed 2 of 2 variant (s)

      Your advantages / Product description

      Advantages
      • The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
      • The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
      • The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
      • The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
      • A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.

      Application and approval

      Applications
      • Fire protection plates
      • Fire protection boards
      • Ventilation systems
      • Wire and Nonius hangers
      • Mounting rails
      • Metal clamps
      • Substructures made of wood and metal
      Building materials
      Approved for:
      • Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
      Also suitable for:
      • Solid sand-lime brick
      • Natural stone with dense structure
      • Prestressed hollow-core concrete slabs
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-06/0175
      • DoP No. 0235
      • GS 6.1/21-076-1

      Assembly instruction

      Functionality
      • The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation.
      • The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
      • Available setting tools:
        FNA S-SBO to slip onto the drill,
        FNA S-SDS for series installation with a drilling hammer,
        FNA S-H for the manual installation of mounting rails.
      Installation FNA II OE
      1 / 4
      • 1
        Installation FNA II OE
      • 2
      • 3
      • 4

      Documents for Downloading

      • ETAs and DoPs
      • Approvals and Certificates
      • Technical documents
      ETA Certification Document
      pdf, ETA-06/0175
      European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete
      Created on 03/02/2021
      DOP - Declaration of Performance
      pdf, DoP No. 0235
      Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)
      Created on 03/16/2021
      Similiar product categories
      cd-blue-c6785f99-s8hkv