Art.-No. 569385

fischer Nail anchor FNA II 6 x 30/40 U R RB with pre-mounted washer stainless steel (300pcs.)

Top Features
  • Easy removal of fire protection plates without damage These can be reused.
  • Secure fixing, even when exposed to vibration, wind, and pushing/pulling effects.
  • Low anchorage depth saves time and costs.
  • Simple assembly with hammer or compressed air setting device.
  • Test certificates from RTW and ZWS.

Your advantages / Product description

The removable anchoring solution for fire protection panels.
Advantages
  • The special active principle allows for a simple hammerset installation and therefore a short processing time.
  • The extremely short anchor depth prevents reinforcement hits and creates the conditions for a trouble-free installation.
  • The optimised expansion clip ensures a good hold when the anchor is placed into the drill hole and prevents it from falling out during overhead installations.
  • The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
The fischer nail anchor FNA II U R RB with pre-mounted washer is ideal for use as a removable anchoring solution for fire protection boards and for multiple fixations of non-structural systems in concrete. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is mounted in a few hammer blows or with a hammer drill in a time-saving push-through installation. The optimised expansion clip ensures a good hold when the anchor is placed into the drill hole and prevents it from falling out during overhead installations. The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety. The FNA II expands automatically under load.

Application and approval

Applications
  • Fire protection plates
  • Fire protection boards
Building materials
Approved for:
  • Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
Also suitable for:
  • Solid sand-lime brick
  • Natural stone with dense structure
  • Prestressed hollow-core concrete slabs
You can find detailed information on building materials in the approval document.
Approval
  • ETA-06/0175
  • DoP No. 0235
  • GS 6.1/21-076-1

Assembly instruction

Functionality
  • The FNA II with nail head is suitable for push-through installation.
  • The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the hole wall.
  • Available setting tools:
    FNA S-SBO for attachment to drill
    FNA S-SDS for series installation with a hammer drill
Installation FNA II RB
1 / 3
Deinstallation
1 / 4

Technical Data

ETA-approval
Anchor length (
l
)
77,5 mm
Drill diameter (
d0
)
6 mm
Min. drill hole depth for through fixings (
h2
)
80 mm
Max. fixture thickness (
t fix
)
40 mm
Head-ø (
dh
)
12 mm
Packaging Folding box
Amount 300 pcs.
GTIN (EAN-Code) 4048962495515

Documents for Downloading

  • ETAs and DoPs
  • Approvals and Certificates
  • Technical documents
European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete
Created on 03/02/2021
Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)
Created on 03/16/2021
cd-green-58bb58464c-vq6sw