Heavy-duty anchor TA M / SL M
  • Product Category Picture: "Heavy-duty anchor TA M-S"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
    • Application Picture
      Heavy-duty internal threaded anchor with screw for low edge clearances.

      Heavy-duty anchor TA M-S

      The fischer heavy-duty anchor TA M is an internal threaded anchor made from zinc-plated steel for pre-positioned installation. The heavy-duty anchor is ideal for anchoring fall protection devices, systems, and machines in non-cracked concrete. The optimised anchor geometry minimises setting energy and allows for use in really confined spaces. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial clearances.
      Product Variant
      Download of image data

      Product Variant

      Filter
      Filter
      Approvals / Test reports
      6 product variants
      Drill diameter
      Width across nut
      Washer (outer diameter x thickness)
      Contents
      Packaging
      Amount
      Legend = Permission Available— = Permission not Available
      Viewed 6 of 6 variant (s)

      Your advantages / Product description

      Advantages
      • The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
      • The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
      • The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
      • The red plastic cap protects against soiling and thus ensures free-running of the thread.

      Application and approval

      Applications
      • Steel constructions
      • Handrails
      • Consoles
      • Ladders
      • Cable trays
      • Machines
      • Staircases
      • Gates
      • Façades
      • Stand-off installations
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, non-cracked
      Also suitable for:
      • Concrete C12/15
      • Natural stone with dense structure
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-04/0003
      • DoP No. 0263

      Assembly instruction

      Functionality
      • The TAM is suitable for pre-positioned installation.
      • When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
      • For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered.
      Installation TA M
      1 / 6
      • 1
        Installation TA M
      • 2
      • 3
      • 4
      • 5
      • 6

      Documents for Downloading

      • ETAs and DoPs
      ETA Certification Document
      pdf, ETA-04/0003
      European Technical Assessment for fischer Heavy-duty anchor TA M, TA M S, TA M T - Mechanical fasteners for use in concrete
      Created on 06/12/2018
      DOP - Declaration of Performance
      pdf, DoP No. 0263
      Declaration of Performance for fischer Heavy-duty anchor TA M, TA M S, TA M T (Mechanical anchor for use in concrete)
      Created on 01/12/2021
      cd-blue-c6785f99-bhvvp