TermoZ CS II
  • Product Picture: "fischer TermoZ CS II 8/95"
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Youtube VideoYoutube VideoYoutube Video
    • Youtube VideoYoutube VideoYoutube Video
    • Product Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
      Art.-No. 564146

      fischer TermoZ CS II 8/95

      Product Variant
      Download of image data
      Top Features
      • The fixing is pushed through the insulation into the drill hole and is screwed in.
      • For countersunk monting, the setting tool TermoZ CS is required.
      • Optionally, the setting tool TermoZ CS can also be used for flush installation by turning the stopping disc.
      • When using the setting tool, the installation is completed when the stopping disc is flush with the insulation panel.
      • For countersunk mounting the anchor plate needs to be covered with a round cap. For a surface-flush assembly, a closing plug is not necessary.

      Your advantages / Product description

      The strong screw fixing for all insulation materials and substrates.
      Advantages
      • Due to the steel compound screw of the TermoZ CS II, all facade insulations including the fire bar can be fastened securely.
      • The screw fixing is also approved for fixing ETICS to ceiling undersides.
      • The setting tool is used to countersink the anchor optimally, resulting in an even plaster layer without anchor marks.
      • Due to the special expansion zone of the anchor sleeve, the TermoZ CS II, is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
      • The plate design and sleeve labeling allow correct and intuitive application.
      • The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
      • The special geometry of the underhead plate reduces the necessary insertion torque for convenient and fast installation.
      TermoZ CS II est la fixation à vis solide pour l'isolation des murs extérieurs pour la fixation sûre de tout panneau isolant sur tous les matériaux de construction solides et perforés. Développé pour les besoins des installateurs, TermoZ CS II est facile à utiliser et garantit une installation rapide. La fixation isolante TermoZ CS II est approuvée pour toutes les classes de matériaux de construction courantes A,B,C,D,E. L’outil de réglage CS garantit un processus de réglage optimal sans marques d’ancrage.
      Youtube VideoYoutube VideoYoutube Video

      Application and approval

      Applications
      • Attachment of ETICS insulating boards on concrete and masonry
      • Flush installation in all conventional insulation materials
      • Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels
      • Fixing of ETICS insulating boards for new buildings and energetic building renovations
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Concrete (weather shell)
      • Building brick
      • Solid sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Lightweight aggregate concrete
      • Aerated concrete
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-14/0372
      • DoP No. 0298
      • DoP No. 0346
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functionality
      • The fixing is pushed through the insulation into the drill hole and is screwed in. For ceiling soffits, the installation is carried out through the base plaster including fabric and insulation.
      • For countersunk mounting, the setting tool TermoZ CS is required.
      • Optionally, the setting tool TermoZ CS can also be used for flush installation by turning the stopping disc.
      • When using the setting tool, the installation is completed when the stopping disc is flush with the insulation panel.
      • For countersunk mounting the anchor plate needs to be covered with a closing cap.
      • For a surface-flush setting, a closing plug is not necessary.
      Flush to surface installation with setting tool CS
      1 / 5
      • 1
        Flush to surface installation with setting tool CS
      • 2
      • 3
      • 4
      • 5
      Countersunk installation with setting tool CS
      1 / 6
      • 1
        Countersunk installation with setting tool CS
      • 2
      • 3
      • 4
      • 5
      • 6

      Technical Data

      ETA-approval
      Drill diameter (
      d0
      )      		8 mm
      Effect. anchorage depth (
      hef
      )      		25 mm
      Max. usable length at surface-flush installation (
      tfix
      )      		70 mm
      Min. total drill whole depth incl. insulation at surface flush installation (
      h
      )      		110 mm
      Drive TX30
      Amount 100 pcs.
      GTIN (EAN-Code) 4048962459272

      Documents for Downloading

      • ETAs and DoPs
      • Sustainability
      • Technical documents
      • Sales materials
      ETA Certification Document
      pdf, ETA-14/0372
      European Technical Assessment for fischer TermoZ CS II 8 and fischer TermoZ CS II 8 DT 110 V
      Created on 11/03/2023
      DOP - Declaration of Performance
      pdf, DoP No. 0346
      Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic anchors for use in concrete)
      Created on 11/17/2023
      DOP - Declaration of Performance
      pdf, DoP No. 0298
      Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic fastener for fixing of external thermal insulation composite systems with rendering)
      Created on 05/16/2022
      cd-green-58bb58464c-5xn5l