Screw fixing for solid and hollow building materials
  • Product Category Picture: "TermoZ CS II"
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Youtube VideoYoutube VideoYoutube Video
    • Youtube VideoYoutube VideoYoutube Video
    • Product Category Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
      The strong screw fixing for all insulation materials and substrates.

      TermoZ CS II

      TermoZ CS II is the strong ETICS screw fixing for the secure fastening of any insulation board to all solid and perforated building materials. Developed for the needs of fabricators, TermoZ CS II is easy to use and guarantees fast installation. The insulation fixing TermoZ CS II is approved for all common building material classes A,B,C,D,E. The optional setting tool CS guarantees an optimal setting process without anchor marks.
      Product variants
      Download of image data

      Product variants

      Approvals / Test reports
      19 Product variant (s)
      Drill diameter
      Effect. anchorage depth
      Max. usable length at surface-flush installation
      Min. total drill whole depth incl. insulation at surface flush installation
      Max. usable length at countersunk installation
      Min. total drill whole depth incl. insulation at countersunk installation
      Legend = Permission Available— = Permission not Available
      More results
      Viewed 18 of 19 variant (s)

      The advantages / Product description

      Advantages
      • Due to the steel compound screw of the TermoZ CS II, all facade insulations including the fire bar can be fastened securely.
      • The setting tool is used to countersink the anchor optimally, resulting in an even plaster layer without anchor marks.
      • Due to the special expansion zone of the anchor sleeve the TermoZ CS II is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
      • The plate design and the sleeve labeling allow correct and intuitive application.
      • The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
      • The special geometry of the underhead plate reduces the necessary insertion torque for convenient and fast installation.
      Youtube VideoYoutube VideoYoutube Video

      Application and approval

      Applications
      • Attachment of ETICS insulating boards on concrete and masonry
      • Flush installation in all conventional insulation materials
      • Countersunk installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels
      • Fixing of ETICS insulating boards for new buildings and energetic building renovations
      • The screw fixing is also approved for fixing ETICS to ceiling soffits.
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Concrete (weather shell)
      • Building brick
      • Solid sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Lightweight aggregate concrete
      • Aerated concrete
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-14/0372
      • DoP No. 0298
      • DoP No. 0346
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functionality
      • The fixing is pushed through the insulation into the drill hole and is screwed in. For ceiling soffits, the installation is carried out through the reinforcing layer and insulation.
      • For countersunk mounting, the setting tool TermoZ CS is required.
      • Optionally, the setting tool TermoZ CS can also be used for flush installation by turning the stopping disc.
      • When using the setting tool, the installation is completed when the stopping disc is flush with the insulation panel.
      • For countersunk mounting the anchor plate needs to be covered with a round cap.
      • For a surface-flush setting, a round cap is not necessary.
      Flush to surface installation with setting tool CS
      1 / 5
      • 1
        Flush to surface installation with setting tool CS
      • 2
      • 3
      • 4
      • 5
      Countersunk installation with setting tool CS
      1 / 6
      • 1
        Countersunk installation with setting tool CS
      • 2
      • 3
      • 4
      • 5
      • 6

      Documents for download

      • ETAs and DoPs
      • Sustainability
      • Technical documents
      • Sales materials
      ETA Certification Document
      pdf, ETA-14/0372
      European Technical Assessment for fischer TermoZ CS II 8 and fischer TermoZ CS II 8 DT 110 V
      Created on 11/03/2023
      DOP - Declaration of Performance
      pdf, DoP No. 0346
      Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic anchors for use in concrete)
      Created on 11/17/2023
      DOP - Declaration of Performance
      pdf, DoP No. 0298
      Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic fastener for fixing of external thermal insulation composite systems with rendering)
      Created on 05/16/2022
      cd-blue-c6785f99-77wnx