The economic screw fixing for all ETICS insulation materials.

Render fixing FIF-CS 8

The ETA approved fischer render fixing FIF-CS is ideal for fixing pressure-resistant insulation up to 340 mm thick for thermal insulation systems such as polystyrene boards or mineral wool boards in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely . The uniform setting depth for all building materials simplifies installation. The screw fixing comprises a grey plug sleeve with attached octogonal disc and a compound screw. The compound screw minimises the thermal bridge. This in turn prevents plug marks on the façade. The FIF-CS is set with a standard screwdriver.

Product variants

Download of image data

Product variants

Approvals / Test reports

15 Product variant (s)

Drill diameter

Min. drill hole depth

Min. effect. anchorage depth

Anchor length

Max. fixture thickness

Disc ø

Legend = Permission Available— = Permission not Available

Viewed 15 of 15 variant (s)

Advantages

Compound screw minimises the thermal bridge, thus there are no fixing marks on the façade.
Less drill wear and drill time due to minimum installation depth of 35 mm in the substrate.
With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render.
For insulation material thicknesses up to 340 mm.
Standard embedment depth for all building materials.

Applications

Fixing of ETICS insulation boards on concrete and masonry
Flush installation in all conventional insulation materials

Building materials

Building material classes A, B, C, D, E
Concrete
Concrete (weather shell)
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

* You can find detailed information on building materials in the registration document.

Approvals

ETA-15/0006
DoP No. 0254
EPD-FIW-20210314-CBD1-EN

Functionality

The fixing is pushed through the insulation into the drilled hole and is screwed tight.
For lengths from 250 mm, at least 180 mm long TX25 bits are required. These are not included in the delivery assortment.

Surface-flush installation

1 / 4

System components

Hammer drill bit Quattric II S / Quattric II
85 variants

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Min. effect. anchorage depth ( h_ef )	35 mm
Anchor length ( l )	108 mm
Max. fixture thickness ( t _fix )	70 mm
Disc ø	60 mm
Drive	TX30
Amount	100 pcs.
GTIN (EAN-Code)	4048962231175

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Min. effect. anchorage depth ( h_ef )	35 mm
Anchor length ( l )	128 mm
Max. fixture thickness ( t _fix )	90 mm
Disc ø	60 mm
Drive	TX30
Amount	100 pcs.
GTIN (EAN-Code)	4048962231182

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Min. effect. anchorage depth ( h_ef )	35 mm
Anchor length ( l )	148 mm
Max. fixture thickness ( t _fix )	110 mm
Disc ø	60 mm
Drive	TX30
Amount	100 pcs.
GTIN (EAN-Code)	4048962231199

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Min. effect. anchorage depth ( h_ef )	35 mm
Anchor length ( l )	168 mm
Max. fixture thickness ( t _fix )	130 mm
Disc ø	60 mm
Drive	TX30
Amount	100 pcs.
GTIN (EAN-Code)	4048962231205

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Min. effect. anchorage depth ( h_ef )	35 mm
Anchor length ( l )	188 mm
Max. fixture thickness ( t _fix )	150 mm
Disc ø	60 mm
Drive	TX30
Amount	100 pcs.
GTIN (EAN-Code)	4048962231212

Render fixing FIF-CS 8

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download