Render fixing FIF-CS 8
  • Product Picture: "fischer Render fixing FIF-CS 8/100"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Application Picture
      Art.-No. 534159

      fischer Render fixing FIF-CS 8/100

      Product Variant
      Download of image data
      Top Features
      • High load absorption due to innovative compoundscrew.
      • Low setting depth for all building material categories reduces amount of drilling. This saves time and costs.
      • No marks on the plaster surface. Glass fibre reinforced compoundscrew with steel point reduces heat transmission.

      Your advantages / Product description

      The economic screw fixing for all thermal insulation boards in an external ETIC-system.
      Advantages
      • Compound screw minimises the thermal bridge, thus there are no fixing marks on the façade.
      • Less drill wear and drill time due to minimum installation depth of 35 mm in the substrate.
      • With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render.
      • For insulation material thicknesses up to 340 mm.
      • Standard embedment depth for all building materials.
      The ETA approved fischer render fixing FIF-CS is ideal for fixing pressure-resistant insulation up to 340 mm thick for thermal insulation systems such as polystyrene boards or mineral wool boards in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely . The uniform setting depth for all building materials simplifies installation. The screw fixing comprises a grey plug sleeve with attached octogonal disc and a compound screw. The compound screw minimises the thermal bridge. This in turn prevents plug marks on the façade. The FIF-CS 8 is set with a standard screwdriver.

      Application and approval

      Applications
      • Fixing of ETICS insulation boards on concrete and masonry
      • Flush installation in all conventional insulation materials
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Concrete (weather shell)
      • Building brick
      • Solid sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Lightweight aggregate concrete
      • Aerated concrete
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-15/0006
      • DoP No. 0254
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functionality
      • The fixing is pushed through the insulation into the drilled hole and is screwed tight.
      • For lengths from 250 mm, at least 180 mm long TX25 bits are required. These are not included in the delivery assortment.
      Surface-flush installation
      1 / 4
      • 1
        Surface-flush installation
      • 2
      • 3
      • 4

      Technical Data

      ETA-approval
      Drill diameter (
      d0
      )      		8 mm
      Min. drill hole depth (
      h1
      )      		45 mm
      Min. effect. anchorage depth (
      hef
      )      		35 mm
      Anchor length (
      l
      )      		148 mm
      Max. fixture thickness (
      t fix
      )      		110 mm
      Disc ø 60 mm
      Drive TX30
      Amount 100 pcs.
      GTIN (EAN-Code) 4048962231199

      Documents for Downloading

      • ETAs and DoPs
      • Sustainability
      • Technical documents
      ETA Certification Document
      pdf, ETA-15/0006
      European Technical Assessment for fischer FIF-CS-8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry
      Created on 05/31/2018
      DOP - Declaration of Performance
      pdf, DoP No. 0254
      Declaration of Performance for fischer FIF-CS-8 (Plastic anchors for use in concrete and masonry)
      Created on 01/15/2021
      cd-green-58bb58464c-47qvg